Fish Meal PLC Operator
2026-11-21T11:54:36+00:00
Victory Farms
https://cdn.greatkenyanjobs.com/jsjobsdata/data/employer/comp_8752/logo/vic.png
https://victoryfarmskenya.com/
FULL_TIME
Nairobi
kenya
00100
Kenya
Agriculture, Food, and Natural Resources
Science & Engineering, Manufacturing & Warehouse, Farming & Outdoors, Agribusiness, Agricultural Services & Products
2026-12-02T17:00:00+00:00
8
Background
Victory Farms is a tilapia fish farm established in 2015. VF is located on the Kenyan side of Lake Victoria and has distribution capacity throughout Kenya. The Company is rapidly expanding its farm operation, fish processing, and sales & marketing capabilities. By the end of 2017, VF is on track to be the largest aquaculture farm in East Africa.
Key Responsibilities:
Control Room and PLC Operation
- Monitor the fish meal control room continuously throughout the shift and maintain full attention to the PLC/SCADA displays, alarms, trends and equipment status.
- Start up, operate and shut down plant equipment from the PLC in the approved sequence and only after receiving clearance from the Fish Meal Plant Supervisor and field operators.
- Monitor and control the feeding screws, crusher, cooker, screw press, stick water system, fish oil setting system, dryer, cooler screw conveyor, grinder, conveyors and related auxiliary equipment.
- Observe process values including temperatures, pressures, motor currents, equipment loads, speeds, levels, flow rates, moisture-related indicators and production throughput.
- Adjust authorized set points and operating parameters within approved limits to maintain a steady production flow and required product quality.
- Confirm interlocks, emergency stops and safety systems are healthy before starting or restarting equipment.
- Never bypass alarms, trips, interlocks or safety devices unless formally authorized under an approved procedure.
Alarm Management and Process Response
- Acknowledge alarms promptly, identify the affected equipment or process condition, and take the approved corrective action.
- Immediately inform the Fish Meal Plant Supervisor and relevant field operator of critical alarms, trips, abnormal trends or unsafe conditions.
- Stop or isolate equipment safely when continued operation could cause injury, equipment damage, contamination, fire, blockage or product loss.
- Monitor process trends to identify early signs of overloading, overheating, low flow, high pressure, abnormal levels, motor overload or unstable operation.
- Coordinate with field operators to verify actual plant conditions before restarting tripped equipment or changing critical operating parameters.
- Record alarm events, trips, restarts, downtime, corrective actions and unresolved abnormalities in the control room log.
Production and Quality Control
- Maintain stable cooking, pressing, drying, cooling and grinding conditions according to the approved operating recipe and Supervisor instructions.
- Monitor raw material feed rate and equipment loading to prevent surges, blockages and unnecessary product loss.
- Coordinate with the team and Fish Meal Plant Supervisor when process adjustments are required for moisture, appearance, smell or other product specifications.
- Operate the process to prevent undercooking, overcooking, wet meal, burned meal, contamination and excessive fish oil or stick water losses.
- Keep production batches clearly identified and enter the required batch, product and traceability information accurately.
Communication and Shift Coordination
- Maintain clear communication with the Fish Meal Plant Supervisor, Processing, Maintenance and Quality teams.
- Issue clear instructions to field operators when equipment checks, valve changes, blockage inspections or local confirmations are required.
- Escalate process, mechanical, electrical, instrumentation or automation faults without delay and follow the Supervisor’s direction.
- Provide a complete shift handover covering plant status, active alarms, equipment under maintenance, process settings, quality concerns, downtime and pending actions.
- Support plant trials, commissioning activities, recipe optimization and continuous improvement work as assigned.
Control Room Records and Reporting
- Complete hourly operating logs and record key process values, throughput, downtime, alarm events and production figures accurately.
- Prepare or contribute to shift production reports, downtime reports, utility records and incident or abnormality reports.
- Maintain control room logbooks, checklists and electronic records in a clear, timely and traceable manner.
- Report inaccurate instruments, faulty indicators, communication failures or unusual PLC/SCADA behavior immediately.
- Protect system passwords and access rights and do not install software, connect unauthorized devices or alter PLC programs.
Equipment Care and Basic Troubleshooting
- Carry out pre-start control room checks and confirm availability of power, utilities, communication systems and required field clearances.
- Use PLC indications and trends to help identify blockages, overloads, abnormal temperatures, pressure changes, level deviations and equipment trips.
- Perform only authorized operating resets and basic control adjustments; all programming, wiring and instrument repairs must be handled by authorized personnel.
- Coordinate safe isolation and lockout/tagout with the Fish Meal Plant Supervisor and Maintenance team before work begins on affected equipment.
- Keep the control room, operator desk, panels, monitors and records clean, organized and protected from dust, water and unauthorized access.
Safety, Hygiene and Environmental Control
- Follow all site safety procedures for rotating equipment, hot surfaces, steam, electrical systems, chemicals and emergency response.
- Use required personal protective equipment when entering production areas and comply with lockout/tagout requirements.
- Monitor process conditions that may contribute to spills, wastewater, odour, dust, overheating or fire risk and report deviations immediately.
- Follow GMP, hygiene and housekeeping requirements and prevent food/feed safety or cross-contamination risks.
- Report unsafe conditions, incidents, near misses and environmental concerns immediately.
Qualifications & Requirements:
- Diploma or Degree in Electrical Engineering, Instrumentation and Control, Automation, Process Operations, Mechanical Engineering or a related technical field.
- Practical training in PLC/SCADA operation, industrial control systems or process plant operation is required.
- Training in workplace safety, lockout/tagout, HACCP, GMP, fire safety or first aid will be an added advantage.
Experience:
- Minimum 2-3 years of experience operating a PLC/SCADA-controlled process plant, preferably in fish meal, animal feed, rendering, food processing, oil extraction or continuous thermal processing.
- Practical experience monitoring motors, conveyors, cookers, presses, dryers, tanks, pumps and process instrumentation from a central control room.
- Experience responding to alarms, analyzing process trends, completing shift logs and coordinating with field operators.
- Experience in a newly commissioned plant will be an added advantage.
Skills & Attributes:
- Good understanding of PLC/SCADA screens, process alarms, interlocks, trends and equipment status indications.
- Able to read process flow diagrams, operating procedures, equipment tags, control parameters and production records.
- Good observation, concentration, numerical accuracy and problem-solving skills.
- Able to remain attentive throughout the shift and respond calmly and quickly to abnormal conditions.
- Clear communication and strong coordination skills with field operators, Maintenance, Quality and Supervisors.
- Basic understanding of electrical, instrumentation and mechanical systems, with strict respect for authorization limits.
- Honest, responsible, disciplined and able to work with limited supervision.
- Willing to work shifts, weekends and public holidays when required.
- Monitor the fish meal control room continuously throughout the shift and maintain full attention to the PLC/SCADA displays, alarms, trends and equipment status.
- Start up, operate and shut down plant equipment from the PLC in the approved sequence and only after receiving clearance from the Fish Meal Plant Supervisor and field operators.
- Monitor and control the feeding screws, crusher, cooker, screw press, stick water system, fish oil setting system, dryer, cooler screw conveyor, grinder, conveyors and related auxiliary equipment.
- Observe process values including temperatures, pressures, motor currents, equipment loads, speeds, levels, flow rates, moisture-related indicators and production throughput.
- Adjust authorized set points and operating parameters within approved limits to maintain a steady production flow and required product quality.
- Confirm interlocks, emergency stops and safety systems are healthy before starting or restarting equipment.
- Never bypass alarms, trips, interlocks or safety devices unless formally authorized under an approved procedure.
- Acknowledge alarms promptly, identify the affected equipment or process condition, and take the approved corrective action.
- Immediately inform the Fish Meal Plant Supervisor and relevant field operator of critical alarms, trips, abnormal trends or unsafe conditions.
- Stop or isolate equipment safely when continued operation could cause injury, equipment damage, contamination, fire, blockage or product loss.
- Monitor process trends to identify early signs of overloading, overheating, low flow, high pressure, abnormal levels, motor overload or unstable operation.
- Coordinate with field operators to verify actual plant conditions before restarting tripped equipment or changing critical operating parameters.
- Record alarm events, trips, restarts, downtime, corrective actions and unresolved abnormalities in the control room log.
- Maintain stable cooking, pressing, drying, cooling and grinding conditions according to the approved operating recipe and Supervisor instructions.
- Monitor raw material feed rate and equipment loading to prevent surges, blockages and unnecessary product loss.
- Coordinate with the team and Fish Meal Plant Supervisor when process adjustments are required for moisture, appearance, smell or other product specifications.
- Operate the process to prevent undercooking, overcooking, wet meal, burned meal, contamination and excessive fish oil or stick water losses.
- Keep production batches clearly identified and enter the required batch, product and traceability information accurately.
- Maintain clear communication with the Fish Meal Plant Supervisor, Processing, Maintenance and Quality teams.
- Issue clear instructions to field operators when equipment checks, valve changes, blockage inspections or local confirmations are required.
- Escalate process, mechanical, electrical, instrumentation or automation faults without delay and follow the Supervisor’s direction.
- Provide a complete shift handover covering plant status, active alarms, equipment under maintenance, process settings, quality concerns, downtime and pending actions.
- Support plant trials, commissioning activities, recipe optimization and continuous improvement work as assigned.
- Complete hourly operating logs and record key process values, throughput, downtime, alarm events and production figures accurately.
- Prepare or contribute to shift production reports, downtime reports, utility records and incident or abnormality reports.
- Maintain control room logbooks, checklists and electronic records in a clear, timely and traceable manner.
- Report inaccurate instruments, faulty indicators, communication failures or unusual PLC/SCADA behavior immediately.
- Protect system passwords and access rights and do not install software, connect unauthorized devices or alter PLC programs.
- Carry out pre-start control room checks and confirm availability of power, utilities, communication systems and required field clearances.
- Use PLC indications and trends to help identify blockages, overloads, abnormal temperatures, pressure changes, level deviations and equipment trips.
- Perform only authorized operating resets and basic control adjustments; all programming, wiring and instrument repairs must be handled by authorized personnel.
- Coordinate safe isolation and lockout/tagout with the Fish Meal Plant Supervisor and Maintenance team before work begins on affected equipment.
- Keep the control room, operator desk, panels, monitors and records clean, organized and protected from dust, water and unauthorized access.
- Follow all site safety procedures for rotating equipment, hot surfaces, steam, electrical systems, chemicals and emergency response.
- Use required personal protective equipment when entering production areas and comply with lockout/tagout requirements.
- Monitor process conditions that may contribute to spills, wastewater, odour, dust, overheating or fire risk and report deviations immediately.
- Follow GMP, hygiene and housekeeping requirements and prevent food/feed safety or cross-contamination risks.
- Report unsafe conditions, incidents, near misses and environmental concerns immediately.
- Good understanding of PLC/SCADA screens, process alarms, interlocks, trends and equipment status indications.
- Able to read process flow diagrams, operating procedures, equipment tags, control parameters and production records.
- Good observation, concentration, numerical accuracy and problem-solving skills.
- Able to remain attentive throughout the shift and respond calmly and quickly to abnormal conditions.
- Clear communication and strong coordination skills with field operators, Maintenance, Quality and Supervisors.
- Basic understanding of electrical, instrumentation and mechanical systems, with strict respect for authorization limits.
- Honest, responsible, disciplined and able to work with limited supervision.
- Willing to work shifts, weekends and public holidays when required.
- Diploma or Degree in Electrical Engineering, Instrumentation and Control, Automation, Process Operations, Mechanical Engineering or a related technical field.
- Practical training in PLC/SCADA operation, industrial control systems or process plant operation is required.
- Training in workplace safety, lockout/tagout, HACCP, GMP, fire safety or first aid will be an added advantage.
JOB-6b01867c5d1f8
Vacancy title:
Fish Meal PLC Operator
[Type: FULL_TIME, Industry: Agriculture, Food, and Natural Resources, Category: Science & Engineering, Manufacturing & Warehouse, Farming & Outdoors, Agribusiness, Agricultural Services & Products]
Jobs at:
Victory Farms
Deadline of this Job:
Wednesday, December 2 2026
Duty Station:
Nairobi | kenya
Summary
Date Posted: Saturday, November 21 2026, Base Salary: Not Disclosed
Similar Jobs in Kenya
Learn more about Victory Farms
Victory Farms jobs in Kenya
JOB DETAILS:
Background
Victory Farms is a tilapia fish farm established in 2015. VF is located on the Kenyan side of Lake Victoria and has distribution capacity throughout Kenya. The Company is rapidly expanding its farm operation, fish processing, and sales & marketing capabilities. By the end of 2017, VF is on track to be the largest aquaculture farm in East Africa.
Key Responsibilities:
Control Room and PLC Operation
- Monitor the fish meal control room continuously throughout the shift and maintain full attention to the PLC/SCADA displays, alarms, trends and equipment status.
- Start up, operate and shut down plant equipment from the PLC in the approved sequence and only after receiving clearance from the Fish Meal Plant Supervisor and field operators.
- Monitor and control the feeding screws, crusher, cooker, screw press, stick water system, fish oil setting system, dryer, cooler screw conveyor, grinder, conveyors and related auxiliary equipment.
- Observe process values including temperatures, pressures, motor currents, equipment loads, speeds, levels, flow rates, moisture-related indicators and production throughput.
- Adjust authorized set points and operating parameters within approved limits to maintain a steady production flow and required product quality.
- Confirm interlocks, emergency stops and safety systems are healthy before starting or restarting equipment.
- Never bypass alarms, trips, interlocks or safety devices unless formally authorized under an approved procedure.
Alarm Management and Process Response
- Acknowledge alarms promptly, identify the affected equipment or process condition, and take the approved corrective action.
- Immediately inform the Fish Meal Plant Supervisor and relevant field operator of critical alarms, trips, abnormal trends or unsafe conditions.
- Stop or isolate equipment safely when continued operation could cause injury, equipment damage, contamination, fire, blockage or product loss.
- Monitor process trends to identify early signs of overloading, overheating, low flow, high pressure, abnormal levels, motor overload or unstable operation.
- Coordinate with field operators to verify actual plant conditions before restarting tripped equipment or changing critical operating parameters.
- Record alarm events, trips, restarts, downtime, corrective actions and unresolved abnormalities in the control room log.
Production and Quality Control
- Maintain stable cooking, pressing, drying, cooling and grinding conditions according to the approved operating recipe and Supervisor instructions.
- Monitor raw material feed rate and equipment loading to prevent surges, blockages and unnecessary product loss.
- Coordinate with the team and Fish Meal Plant Supervisor when process adjustments are required for moisture, appearance, smell or other product specifications.
- Operate the process to prevent undercooking, overcooking, wet meal, burned meal, contamination and excessive fish oil or stick water losses.
- Keep production batches clearly identified and enter the required batch, product and traceability information accurately.
Communication and Shift Coordination
- Maintain clear communication with the Fish Meal Plant Supervisor, Processing, Maintenance and Quality teams.
- Issue clear instructions to field operators when equipment checks, valve changes, blockage inspections or local confirmations are required.
- Escalate process, mechanical, electrical, instrumentation or automation faults without delay and follow the Supervisor’s direction.
- Provide a complete shift handover covering plant status, active alarms, equipment under maintenance, process settings, quality concerns, downtime and pending actions.
- Support plant trials, commissioning activities, recipe optimization and continuous improvement work as assigned.
Control Room Records and Reporting
- Complete hourly operating logs and record key process values, throughput, downtime, alarm events and production figures accurately.
- Prepare or contribute to shift production reports, downtime reports, utility records and incident or abnormality reports.
- Maintain control room logbooks, checklists and electronic records in a clear, timely and traceable manner.
- Report inaccurate instruments, faulty indicators, communication failures or unusual PLC/SCADA behavior immediately.
- Protect system passwords and access rights and do not install software, connect unauthorized devices or alter PLC programs.
Equipment Care and Basic Troubleshooting
- Carry out pre-start control room checks and confirm availability of power, utilities, communication systems and required field clearances.
- Use PLC indications and trends to help identify blockages, overloads, abnormal temperatures, pressure changes, level deviations and equipment trips.
- Perform only authorized operating resets and basic control adjustments; all programming, wiring and instrument repairs must be handled by authorized personnel.
- Coordinate safe isolation and lockout/tagout with the Fish Meal Plant Supervisor and Maintenance team before work begins on affected equipment.
- Keep the control room, operator desk, panels, monitors and records clean, organized and protected from dust, water and unauthorized access.
Safety, Hygiene and Environmental Control
- Follow all site safety procedures for rotating equipment, hot surfaces, steam, electrical systems, chemicals and emergency response.
- Use required personal protective equipment when entering production areas and comply with lockout/tagout requirements.
- Monitor process conditions that may contribute to spills, wastewater, odour, dust, overheating or fire risk and report deviations immediately.
- Follow GMP, hygiene and housekeeping requirements and prevent food/feed safety or cross-contamination risks.
- Report unsafe conditions, incidents, near misses and environmental concerns immediately.
Qualifications & Requirements:
- Diploma or Degree in Electrical Engineering, Instrumentation and Control, Automation, Process Operations, Mechanical Engineering or a related technical field.
- Practical training in PLC/SCADA operation, industrial control systems or process plant operation is required.
- Training in workplace safety, lockout/tagout, HACCP, GMP, fire safety or first aid will be an added advantage.
Experience:
- Minimum 2-3 years of experience operating a PLC/SCADA-controlled process plant, preferably in fish meal, animal feed, rendering, food processing, oil extraction or continuous thermal processing.
- Practical experience monitoring motors, conveyors, cookers, presses, dryers, tanks, pumps and process instrumentation from a central control room.
- Experience responding to alarms, analyzing process trends, completing shift logs and coordinating with field operators.
- Experience in a newly commissioned plant will be an added advantage.
Skills & Attributes:
- Good understanding of PLC/SCADA screens, process alarms, interlocks, trends and equipment status indications.
- Able to read process flow diagrams, operating procedures, equipment tags, control parameters and production records.
- Good observation, concentration, numerical accuracy and problem-solving skills.
- Able to remain attentive throughout the shift and respond calmly and quickly to abnormal conditions.
- Clear communication and strong coordination skills with field operators, Maintenance, Quality and Supervisors.
- Basic understanding of electrical, instrumentation and mechanical systems, with strict respect for authorization limits.
- Honest, responsible, disciplined and able to work with limited supervision.
- Willing to work shifts, weekends and public holidays when required.
Work Hours: 8
Experience in Months: 36
Level of Education: bachelor degree
Job application procedure
Method of Application
Interested and qualified?
Application link: https://victoryfarmskenya.com/jobs/fish-meal-plc-operator/
All Jobs | QUICK ALERT SUBSCRIPTION